Homepage > Man Pages > Category

Man Pages in Category 8:
Maintenance Commands

This are man pages for commands in category 8: Maintenance Commands.

Page 1 - Page 2 - 2ping: A bi-directional ping client/listener - 2ping6: A bi-directional ping client/listener - 3c5x9setup: setup program for the 3Com 3x9 cards - 3c515-diag: setup and diagnostic program for the 3Com 3c515 Ethernet cards - 6x86_reg: Register Dump utility for Cyrix 6x86 - a2dismod: enable or disable an apache2 module - a2dissite: enable or disable an apache2 site / virtual host - a2enmod: enable or disable an apache2 module - a2ensite: enable or disable an apache2 site / virtual host - aa-audit: set a AppArmor security profile to audit mode - aa-autodep: guess basic AppArmor profile requirements - aa-complain: set a AppArmor security profile to complain mode - aa-decode: decode hex-encoded in AppArmor log files - aa-disable: disable an AppArmor security profile - aa-enforce: set an AppArmor security profile to enforce mode from being... - aa-genprof: profile generation utility for AppArmor - aa-logprof: utility program for managing AppArmor security profiles - aa-notify: display information about logged AppArmor messages - aa-status: display various information about the current AppArmor policy - aa-unconfined: output a list of processes with tcp or udp ports that do not... - aa-update-browser: update browser profiles with browser abstractions - accessdb: dumps the content of a man-db database in a human readable format - accton: turns process accounting on or off - acngfs: Virtual file system for use with apt-cacher-ng - acpid: Advanced Configuration and Power Interface event daemon - acpi_listen: ACPI event listener - actctrl: configure IBM Active 2000 ISDN adaptor - activate: read/write flags marking active boot partition - actsync: Synchronize newsgroups - actsyncd: Synchronize newsgroups - add-apt-key: Command line tool to add GPG keys to the APT keyring - add-shell: add shells to the list of valid login shells - addftpuser: set up anonymous FTP user rmftpuser - addgnupghome: Create .gnupg home directories - addgroup: add a user or group to the system - addpart: simple wrapper around the "add partition" ioctl - addrconsole: Setup a new remote console user - addtcpquota: Allowe or disallowe users to use tcp quota - adduser: add a user or group to the system - add_members: Add members to a list from the command line - adjtimex: display or set the kernel time variables - adjtimexconfig: find kernel clock variables and save for reboots - afpd: Apple Filing Protocol daemon - afp_acls: Setup and Usage Howto for ACLs with Netatalk - afs-newcell: Set up initial database server for AFS cell - afs-rootvol: Generate and populate root volumes for new AFS cells - afsd.fuse: Initializes the Cache Manager and starts related daemons - afsd: Initializes the Cache Manager and starts related daemons - agetty: alternative Linux getty - ahcpd: ad-hoc configuration daemon - aide.wrapper: call aide binary for Debian mechanisms - aideinit: create a new AIDE database - al-httpd: minimal HTTP daemon for Albatross web applications - al-session-daemon: session daemon for Albatross web applications - aliaslookup: Look up mail aliases - alias_manager: manage Sympa aliases - alta-diag: EEPROM setup and diagnostic program for ethernet cards based on... - amaddclient: program to add client to an existing Amanda configuration - amadmin: administrative interface to control Amanda backups - amaespipe: wrapper program for aespipe - amanda: The Open Source Backup Platform - amarchiver: Create, extract or list amanda archive - amavisd-milter: sendmail milter for amavisd-new - amavisd-new-cronjob: Cronjobs for the Debian amavisd-new package - amavisd-new: Interface between MTA and virus scanner/content filters - amcheck: run Amanda self-checks - amcheckdb: check Amanda database for tape consistency - amcheckdump: check the results of an Amanda dump - amcleanup: run the Amanda cleanup process after a failure - amcrypt-ossl-asym: crypt program for Amanda asymmetric data encryption... - amcrypt-ossl: crypt program for Amanda symmetric data encryption using... - amcrypt: reference crypt program for Amanda symmetric data encryption - amcryptsimple: reference simple crypt program for Amanda symmetric data... - amd-fsinfo: coordinate site-wide filesystem information - amd: automatically mount file systems - amdevcheck: Validate an Amanda device and volume - amdump: back up all disks in an Amanda configuration - amfetchdump: extract backup images from multiple Amanda tapes - amflush: flush Amanda backup files from holding disk to tape - amgetconf: look up configuration parameters and manipulate debug logs - amgpgcrypt: reference crypt program for Amanda public-key data encryption - amgtar: Amanda Application to interface with GNU Tar - amiga-fdisk: Amiga disk partitioning program - amlabel: label an Amanda tape - amorad: Amora (A Remote Mobile Assistant) daemon - amoverview: display file systems processed by Amanda over time - ampgsql: Amanda Application to interface with PostgreSQL - amplot: visualize the behavior of Amanda - amq-check-wrap: check loopback RPC connection to amd - amq: automounter query tool - amraw: Amanda Application open and read data - amrecover: Amanda index database browser - amreport: generate a formatted output of statistics for an Amanda run - amrestore: low-level data-extraction from Amanda volumes - amrmtape: remove a tape from the Amanda database - amsamba: Amanda Application to interface with smbclient - amserverconfig: program to setup initial Amanda configuration - amservice: run an amanda service on a client - amstar: Amanda Application to interface with star - amstatus: display the state of an Amanda run - amsuntar: Amanda Application to interface with native tar utility available... - amtape: Control Amanda changers - amtapetype: generate a tapetype definition by testing the device directly - amtoc: generate TOC (Table Of Contents) for an Amanda run - amvault: Copy Amanda dumps from one volume to another - amzfs-sendrecv: Amanda script to create zfs sendrecv - amzfs-snapshot: Amanda script to create zfs snapshot - anacron: runs commands periodically - and: auto nice daemon - anon-proxy: starts the proxyserver of the an.on anonymizing proxy project - anvil: Postfix session count and request rate control - anytun-config: anycast tunneling configuration utility - anytun-controld: anycast tunneling control daemon - anytun-showtables: anycast tunneling routing table visualization utility - anytun: anycast tunneling daemon - aoe-discover: tell aoe driver to discover AoE devices - aoe-flush: flush the down devices out of the aoe driver - aoe-interfaces: restrict aoe driver to specified network interfaces - aoe-mkdevs: create special device files for aoe driver - aoe-mkshelf: create special device files for one shelf address - aoe-revalidate: revalidate the disk size of an aoe device - aoe-stat: print aoe device status report - aoe-version: print AoE-related software version information - aoecfg: manipulate AoE configuration strings - aoeping: simple communication with AoE device - aolserver4-nsd: AOLserver program - ap-auth: AP authorized MAC change utility - ap-config: configure and monitor Atmel and NWN based APs - ap-gl: configure and monitor ATMEL_PRISM based APs - ap-mrtg: AP statistics translators - ap-rrd: AP statistics translators - ap-tftp: TFTP client for upgrading ATMEL AT76C510 WiSOC-based APs - ap-trapd: a SNMP trap processing daemon - ap: parse addresses 822-style - apache2: Apache Hypertext Transfer Protocol Server - apache2ctl: Apache HTTP server control interface - apachectl: Apache HTTP server control interface - apcsmart: Driver for American Power Conversion Smart Protocol UPS equipment - apcupsd: daemon for Most APCC's UPS support under Linux and UNIX - apmd: Advanced Power Management (APM) daemon - apparmor_parser: loads AppArmor profiles into the kernel - apparmor_status: display various information about the current AppArmor... - apphbd: Application Heartbeat Monitor for High-Availability Linux - applyfilter: apply filter settings to news spool - applygnupgdefaults: Run gpgconf --apply-defaults for all users - appmgr: Tool to manage applications and platforms - approx-gc: garbage-collect the cache of Debian archive files - approx-import: copy local .deb files into the approx cache - approx-update: update cached Packages and Sources files - approx: proxy server for Debian archive files - aprsdigi: APRS(tm) digipeater - aprsmon: monitor APRS AX.25 traffic for javAPRS - apt-cache: query the APT cache - apt-cacher-ng: caching proxy for software package downloads - apt-cdrom: APT CDROM management utility - apt-config: APT Configuration Query program - apt-dater: terminal-based remote package update manager - apt-forktracer: a utility for managing package versions - apt-get: APT package handling utility - apt-key: APT key management utility - apt-mark: mark/unmark a package as being automatically-installed - apt-move: move cache of Debian packages into a mirror hierarchy - apt-offline: Offline APT Package manager - apt-p2p: apt helper for peer-to-peer downloads of Debian packages - apt-secure: Archive authentication support for APT - apt-zip-inst: Use apt with removable media - apt-zip-list: Use apt with removable media - apt-zip: Use apt with removable media - apt: Advanced Package Tool - aptitude: high-level interface to the package manager - apturl-gtk: graphical apt-protocol interpreting package installer - apturl-kde: graphical apt-protocol interpreting package installer - apturl: graphical apt-protocol interpreting package installer - apxs2: APache eXtenSion tool - arbitron: arbitron mailboxes - arbitronsort: sorts arbitron(8) output - arched: ARC Hosting Environment Daemon - archive: Usenet article archiver - archived: Mailing List Archiving Daemon for WWSympa - aread: preliminary manpage aread awrite enitune ilmid saaldump sonetdiag... - argus: audit record generation and utilization system - argus_linux: audit record generation and utilization system - arno-iptables-firewall: Single - arp: manipulate the system ARP cache - arp2ethers: convert arpwatch address database to ethers file format - arpalert: ARP traffic monitoring - arpd: userspace arp daemon - arpfetch: obtain ethernet/ip address pairings via snmp - arping: sends arp and/or ip pings to a given host - arpon: Arp handler inspectiON - arpsend: utility to send ARP requests - arpsnmp: keep track of ethernet/ip address pairings - arpspoof: intercept packets on a switched LAN - arptables-restore: Restore ARP Tables - arptables-save: Save ARP Tables - arptables: ARP table administration - arpwatch: keep track of ethernet/ip address pairings - asetkey: Add a key from a keytab to an AFS KeyFile - askpass-fifo: Mandos plugin to get a password from a FIFO - askPrinter: Program to detect the name of your EPSON printer - asmtpd: Avenger SMTP Daemon - asoundconf-gtk: A GUI to select the default ALSA sound card - aspell-autobuildhash: Autobuilding aspell hash files for some dicts - asql: Provide an SQL interface to Apache logfiles - asterisk: All-purpose telephony server - astgenkey: generates keys for for Asterisk IAX2 RSA authentication - astribank_allow: License Xorcom Astribank (xpp) capabilities - astribank_hexload: Xorcom Astribank (xpp) firmware loader - astribank_is_starting: Mark / check is a Xorcom Astribank (xpp) is starting - astribank_tool: Xorcom Astribank (xpp) control tool - at1700-diag: Diagnostic program for the Allied Telesis AT1700 - atalkd: AppleTalk RTMP, NBP, ZIP, and AEP manager - atd: run jobs queued for later execution - atftpd: DARPA Trivial File Transfer Protocol server - athcool: control power-saving mode on AMD Athlon/Duron CPUs - atieventsd: ATI external events daemon - atlantic-setup: Setup program for ethernet cards based on AT/LANTIC DP83905... - atm-tools: preliminary manpage aread awrite enitune ilmid saaldump... - atmaddr: list and maintain local ATM addresses - atmarp: administer classical IP over ATM connections - atmarpd: ATMARP demon - atmdiag: show ATM device driver diagnostics - atmdump: capture or generate ATM cells - atmel_fwl: Load firmware into Atmel at76c50x wireless networking chips - atmloop: get/set loopback mode of ATM interfaces - atmsigd: ATM signaling demon - atmtcp: set up ATM over TCP connections - atp-diag: Diagnostic program for Realtek RTL8002/RTL8012 pocket ethernet... - atsa1: counter-collection - atsadc: counter-collection - attrd_updater: Part of the Pacemaker cluster resource manager - audisp-prelude: plugin for IDMEF alerts - audisp-remote: plugin for remote logging - audispd-zos-remote: z/OS Remote-services Audit dispatcher plugin - audispd: an event multiplexor - auditctl: a utility to assist controlling the kernel's audit system - auditd: The Linux Audit daemon - aulast: a program similar to last - aulastlog: a program similar to lastlog - aureport: a tool that produces summary reports of audit daemon logs - ausearch: a tool to query audit daemon logs - ausyscall: a program that allows mapping syscall names and numbers - auth-client-config: pam and NSS profile switcher - auth2db-alert: alert manager for Auth2DB suite - auth2db-daemon: daemonize tool for Auth2DB suite - auth2db: log parser utility for Auth2DB suite - authbind-helper: helper program to bind sockets to privileged ports without... - authenumerate: Fetches all known users from the authentication modules - auth_krb5: nnrpd Kerberos v5 authenticator - autofs: Control Script for automounter - autolog: Log out idle users - AutomatedBastille: automatically install a profiled Bastille configuration - automount: manage autofs mount points - automysqlbackup: backup all of your database daily, weekly, and monthly - autosupport: interactive script to provide Digiumtm's support with... - autotrust: automated updates of DNSSEC trust anchors - autrace: a program similar to strace - avahi-autoipd.action: avahi-autoipd action script - avahi-autoipd: IPv4LL network address configuration daemon - avahi-daemon: The Avahi mDNS/DNS-SD daemon - avahi-dnsconfd.action: avahi-dnsconfd action script - avahi-dnsconfd: Unicast DNS server from mDNS/DNS-SD configuration daemon - avcstat: Display SELinux AVC statistics - avenger.local: deliver mail for a local user - avmcapictrl: Add, reset or remove active AVM cards and load firmware - avr-evtd: Linkstation AVR Event daemon - awrite: preliminary manpage aread awrite enitune ilmid saaldump sonetdiag... - ax25d: General purpose AX.25, NET/ROM and Rose daemon - ax25ipd: AX.25 into IP Encapsulator - ax25mond: dump the AX.25 network traffic and and provide sockets where the... - ax25rtctl: AX.25 routing control program - ax25rtd: AX.25 routing daemon - ax25spyd: ax.25 traffic analyzer, dumper and spy daemon - ax25_call: make an AX.25, NET/ROM, ROSE or TCP connection - axctl: Configure/Kill running AX.25 connections - axe: tools to improve network performance via SNIP - axfr-get: a DNS zone-transfer client - axfrdns-conf: sets up a DNS zone-transfer service - axfrdns: a DNS zone-transfer server - axparms: Configure AX.25 interfaces - axspawn: Allow automatic login to a Linux system - babeld: ad-hoc network routing daemon - backup-manager-purge: backup-manager's wrapper for outdating files - backup-manager-upload: Multiprotocol uploader for backup-manager - backup-manager: An easy to use backup tool for your Linux box - backup: Introduction to the backup command suite - backup2l: low-maintenance backup/restore tool - backup_adddump: Defines a dump level in the dump hierarchy - backup_addhost: Adds a Tape Coordinator entry to the Backup Database - backup_addvolentry: Defines a volume entry in a volume set - backup_addvolset: Creates a new (empty) volume set - backup_apropos: Displays each help entry containing a keyword string - backup_dbverify: Checks the integrity of the Backup Database - backup_deldump: Deletes a dump level from the Backup Database - backup_deletedump: Deletes one or more dump records from the Backup... - backup_delhost: Deletes a Tape Coordinator entry from the Backup Database - backup_delvolentry: Deletes a volume entry from a volume set - backup_delvolset: Deletes one or more volume sets from the Backup Database - backup_diskrestore: Restores the entire contents of a partition - backup_dump: Creates a dump (dumps a volume set at a particular dump level) - backup_dumpinfo: Displays a dump record from the Backup Database - backup_help: Displays help for backup commands - backup_interactive: Enters interactive mode - backup_jobs: Lists pending and running operations in interactive mode - backup_kill: Terminates a pending or running operation - backup_labeltape: Creates the magnetic label on a tape - backup_listdumps: Displays the dump hierarchy from the Backup Database - backup_listhosts: Lists Tape Coordinators registered in the Backup Database - backup_listvolsets: Lists volume set entries from the Backup Database - backup_quit: Leaves interactive mode - backup_readlabel: Reads and displays a tape's label - backup_restoredb: Restores a saved copy of the Backup Database - backup_savedb: Creates a saved copy of the Backup Database - backup_scantape: Extracts dump information from a tape - backup_setexp: Sets the expiration date for existing dump levels - backup_status: Reports a Tape Coordinator's status - backup_volinfo: Displays a volume's dump history from the Backup Database - backup_volrestore: Restores one or more volumes - backup_volsetrestore: Restores all volumes in a volume set - bacula-console: Bacula's management Console - bacula-dir: Bacula Director - bacula-fd: Bacula's File Daemon - bacula-sd: Bacula's Storage Daemon - bacula: The Network Backup Solution - badblocks: search a device for bad blocks - badsect.ufs: create files to contain bad sectors - bandwidthd: Tracks usage of TCP/IP and builds html files with graphs - BastilleBackEnd: harden a host - BastilleChooser: harden a host using predefined profiles - batcher: Article batching for InterNetNews - batctl: B.A.T.M.A.N. advanced control and management tool - batmand: better approach to mobile ad-hoc networking - battery-stats-collector: Collect statistics about battery charge - batv-filter: BATV (Bounce Address Tag Validation) filter for sendmail - baycomepp: Baycom EPP modem driver - baycomusb: Baycom USB modem diagnostics utility - bbackupctl: Control the Box Backup client daemon - bbackupd-config: Box Backup client daemon configuration file generator - bbackupd: Box Backup client daemon - bbackupquery: Box Backup store query and file retrieval - bbmessage.cgi: CGI utility used for proxying Xymon data over HTTP - bbproxy: Xymon message proxy - bbstoreaccounts: Box Backup store accounts manager - bbstored-certs: Manage certificates for the Box Backup system - bbstored-config: Box Backup store daemon configuration file generator - bbstored: Box Backup store daemon - bccmd: Utility for the CSR BCCMD interface - bcfg2-admin: Perform repository administration tasks - bcfg2-build-reports: Generate state reports for Bcfg2 clients - bcfg2-info: Creates a local version of the bcfg2 server core for state... - bcfg2-ping-sweep: Update pingable and pingtime attributes in clients.xml - bcfg2-repo-validate: Check Bcfg2 repository data against data schemas - bcfg2-reports: Query reporting system for client status - bcfg2-server: Server for client configuration specifications - bcmxcp: Driver for UPSes supporting the serial BCM/XCP protocol - bcmxcp_usb: Experimental driver for UPSes supporting the BCM/XCP protocol... - bconsole: Bacula's management Console - bcopy: Bacula's 'Copy from tape' - bcron-exec: Execute jobs on behalf of bcron-sched - bcron-sched: bcron system scheduler - bcron-spool: Manage user crontab submissions - bcron-start: Start the bcron scheduling system - bcron-update: Update system crontabs - bdii4-fwd: services - bdii4-proxy: services - bdii4-update: services - bdii4: services - bd_pgsql_purge: summarizer script for bandwidthd (postgresql mode) - beacon: transmit periodic messages on an AX.25 port - bearerbox: Parts of Kannel, the WAP and SMS gateway - belkin: Driver for Belkin serial UPS equipment - belkinunv: Driver for Belkin "Universal UPS" and compatible - bestfcom: Driver for Best Power Fortress/Ferrups - bestfortress: Driver for old Best Fortress UPS equipment - bestuferrups: Driver for Best Power Micro-Ferrups - bestups: Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment - bextract: Bacula's 'Extract from tape' - bgpd: a BGPv4, BGPv4+, BGPv4 - bhm: program to send SMTP mail to /dev/null - bidentd: Bisqwit's TCP/IP Identification Protocol daemon - bihourly: track ethernet/ip address pairs - bing: compute point to point throughput using two sizes of ICMP... - binkd: transfer files between two Fidonet systems over TCP/IP - binkdlogstat: binkd log analyser and statistic generator - biosdecode: BIOS information decoder - biosinfo: Shows type, revision and vendor of the mainboard as well as... - bitlbee: IRC gateway to IM chat networks - blazer: Driver for Megatec/Q1 protocol serial (blazer_ser) and USB... - bld-mrtg: return MRTG-friendly statistics about local BLD status - bld-pf_log: feed BLD with Postifx log files - bld-pf_policy: BLD policy server for Postfix - bld: A black list daemon - blddecr: decrement the counter of an IP address on a bld host - bldinsert: submit an IP address to a bld host - bldquery: query a bld host - bldread: read bld dumps - bldsubmit: submit an IP address to a bld host - blend-role: add/remove roles in registered Debian Pure Blend - blend-update-menus: add menu of meta package to all Debian Pure Blend users - blend-update-usermenus: update user menus of all Debian Pure Blend users - blend-user: add/remove user to Role of a registered Debian Pure Blend - blkid: command-line utility to locate/print block device attributes - blkiomon: monitor block device I/O based o blktrace data - blktool: Display or change block device settings - blktrace: generate traces of the i/o traffic on block devices - blockdev: call block device ioctls from the command line - blootbot: the slowest and most bloated IRC bot on the internet - blootbotsetup: create the mysql tables for blootbot - bls: Bacula's 'Tape LS' - bluetoothd: Bluetooth daemon - bmc-config: configure BMC values - bmc-device: perform advanced BMC commands - bmc-info: display BMC information - bmc-watchdog: BMC watchdog timer daemon and control utility - bnetd: Unix Battle.net(R) daemon - bnproxy: Battle.net(R) proxy daemon - boa: a single-tasking high performance http server - booleans: Policy booleans enable runtime customization of SELinux policy - bootlogd: record boot messages - bootmail: email a list of address a signed message of logs when this system... - bootparamd: boot parameter server - bootpc: bootp client - bootpd: Internet Boot Protocol server/gateway - bootpef: BOOTP Extension File compiler - bootpgw: Internet Boot Protocol server/gateway - bootptest: send BOOTP queries and print responses - bootstrap_firmware: detect hardware for use with a package manager - bos: Introduction to the bos command suite - bosserver: Initializes the BOS Server - bosskill: send a signal to your boss, or terminate your boss - bos_addhost: Adds a database server machine to the CellServDB file - bos_addkey: Adds a new server encryption key to the KeyFile file - bos_adduser: Adds a privileged user to the UserList file - bos_apropos: Displays each help entry containing a keyword string - bos_create: Defines a new process in the BosConfig file and starts it - bos_delete: Deletes a server process from the BosConfig file - bos_exec: Executes a command on a remote server machine - bos_getdate: Displays the time stamps on an AFS binary file - bos_getlog: Prints a server process's log file - bos_getrestart: Displays the automatic restart times for server processes - bos_getrestricted: Displays whether a bos server is restricted or not - bos_help: Displays help for bos commands - bos_install: Installs a new version of a binary file - bos_listhosts: Displays the contents of the CellServDB file - bos_listkeys: Displays the server encryption keys from the KeyFile file - bos_listusers: Lists the privileged users from the UserList file - bos_prune: Removes obsolete files from /usr/lib/openafs and... - bos_removehost: Removes a database server machine from the CellServDB file - bos_removekey: Removes a server encryption key from the KeyFile file - bos_removeuser: Removes a privileged user from the UserList file - bos_restart: Restarts a server process - bos_salvage: Restores internal consistency to a file system or volume - bos_setauth: Sets authorization checking requirements for all server... - bos_setcellname: Sets the cell's name in ThisCell and CellServDB - bos_setrestart: Sets when the BOS Server restarts processes - bos_setrestricted: place a server in restricted mode - bos_shutdown: Stops a process without changing its status flag - bos_start: Starts a process after setting its status flag - bos_startup: Starts a process without changing its status flag - bos_status: Displays the status of server processes - bos_stop: Stops a process after changing its status flag - bos_uninstall: Reverts to the former version of a process's binary file - bos_util: Manipulate the AFS server Keyfile - bounce: Postfix delivery status reports - bounced: Mailing List Bounce Processing Daemon for WWSympa - bozohttpd: hyper text transfer protocol version 1.1 daemon - bpqparms: Configure BPQ ethernet devices - br2684ctl: RFC1483/2684 Bridge Daemon - brctl: ethernet bridge administration - bscan: Bacula's 'Scan tape' - btape: Bacula's Tape interface test program - btcflash: firmware flash utility for BTC DRW1008 DVD+/-RW recorder - btnx-config: GUI configuration tool for btnx - btnx: Button Extension - btrace: perform live tracing for block devices - btrecord: recreate IO loads recorded by blktrace - btreplay: recreate IO loads recorded by blktrace - btrfs-image: create/restore an image of the filesystem - btrfs-show: scan the /dev directory for btrfs partitions and print results - btrfs: control a btrfs filesystem - btrfsck: check a btrfs filesystem - btrfsctl: control a btrfs filesystem - buffchan: Buffered file-writing backend for INN - builddbm: build radius user database - bum: Graphical runlevel configuration tool - bus: ATM LAN Emulation service demons - buserver: Initializes the Backup Server - butc: Initializes the Tape Coordinator process - bwbar: generates text and graphical readout of current bandwidth use - bw_file_rd: time the reading and summing of a file - bw_mem: time memory bandwidth - bw_mem_rd: time memory read rate (with overhead) - bw_mmap_rd: time the reading and summing of a file - bw_pipe: time data movement through pipes - bw_tcp: time data movement through TCP/IP sockets - bw_unix: UNIX pipe bandwidth - c-icap-client: simple ICAP client - c-icap-config: script to get information about c-icap server - c-icap-libicapapi-config: script to get information about c-icap library - c-icap-mkbdb: simple ICAP clientutility to create Berkeley DB lookup tables Page 1 - Page 2

Copyright © 2011–2018 by topics-of-interest.com . All rights reserved. Hosted by all-inkl.
Contact · Imprint · Privacy

Page generated in 73.40ms.

brieftaubenversteigerung.com | laufbaender.name | daelim-forum.spreadshirt.de