NAMEwackamole - IP-failover high-availability tool
SYNOPSISwackamole [-v] [-c config_file ] [ -s spread ] [-u user ] [ -d ]
DESCRIPTIONwackamole runs the Wackamole IP-failover HA tool using the wackamole.conf file as a base configuration.
OPTIONS-v Display version information and exit. -d Turn on debugging and do not daemonize. -u user Instruct wackamole to use user instread of Wack<pid> as it's username when connecting to Spread. -s spread_loc Connect to Spread running at spread_loc -c config-file Use an alternate configuration file config-file instead of wackamole.conf.
FILESwackamole.conf The default config file location is dependant on the install prefix. ./wackamole.conf is also searched if a local file is not found.
DIAGNOSTICSBy default, Wackamole will log any errors to syslog. Check the appropriate log desitnation on your platform.
BUGSLinux Wackamole makes extensive use of ioctl()s on network devices. When dropping and interface such as eth0:4, all subsequent interfaces (eth0:5, etc.) will disappear and no longer function. There has been special code added that causes Wackamole on Linux to iterate through all IP addresses after a balancing round and attempt to re-plumb them. This may cause gratuitous entries to syslog as well as extra unsolicited ARP responses. Solaris Solaris' local arp-cache is, as far as the author is aware, completely undocumented. The code in Wackamole to open /dev/ip and attempt to read the ARP cache was written only by looking at the output of truss arp -an and should be considered a "stab in the dark."
AUTHORYair Amir <firstname.lastname@example.org> Ryan Caudy <email@example.com> Aashima Munjal <firstname.lastname@example.org> Theo Schlossnagle <email@example.com>
SEE ALSOwackamole.conf(5),wackatrl(1) WACKAMOLE(8)