NAMEkissattach, spattach - Attach a KISS or 6PACK interface
SYNOPSISkissattach [-6] [-l] [-m mtu] [-v] tty port inetaddr spattach [-i inetaddr] [-l] [-m mtu] [-v] tty port
DESCRIPTIONAttach a KISS or a 6PACK interface to what is normally a tty line connected to a TNC in KISS or 6PACK mode. This program will turn itself into a background process. To down an interface send its attach process a SIGTERM. Kissattach takes many of the parameters for the port from the axports(5) file. If the speed parameter in the file is not equal to zero then it is used for the serial port speed, a zero value means that no speed is set. The paclen parameter is used for the device mtu unless overridden by a value on the command line. The tty argument will typically be that of a serial port with a KISS or 6PACK TNC attached, although it could be a pseudo tty or a KISS port emulator such as an SCC card. The port arguments is the name of a port as given in the axports(5) file. The inetaddr argument is the IP address of the new interface. This is now a mandatory argument although due to historical reasons this restriction is lifted if the old -i option is used.
OPTIONS-6 Use the 6PACK line discipline instead of KISS. This is the default if the program is called as spattach. -i inetaddr Set the internet address of the interface. This address may either be a dotted decimal address or a host name. This option is now depreciated and the program will complain about it, though still work. -l Log messages to the system log, the default is not to. -m mtu Sets the mtu of the interface. If this value is not given then the value is taken from the paclen parameter in axports. -v Display the version.
SEE ALSOkill(1), stty(1), ax25(4), axparms(4), axports(5), ifconfig(8).
AUTHORAlan Cox GW4PTS <firstname.lastname@example.org> Jonathan Naylor G4KLX <email@example.com> KISSATTACH(8)