go to
> dahdi_tool(8)
> dahdi_monitor(8)
> asterisk(8)
Homepage > Man Pages > Category > Maintenance Commands
Homepage > Man Pages > Name > D


man page of dahdi_cfg

dahdi_cfg: configures DAHDI kernel modules from /etc/dahdi/system.conf

dahdi_cfg - configures DAHDI kernel modules from /etc/dahdi/system.conf


dahdi_cfg [-c CFG_FILE] [-s] [-f] [-t] [-v [-v ... ] ] dahdi_cfg -h


dahdi_cfg configures DAHDI interface cards from a config file. You generally need to run it with a valid configurations in order for DAHDI modules to work properly. It must be run to configure every DAHDI span. Normally it is run from the DAHDI init script.


-c CFG_FILE Use an alternative configuration file instead of /etc/dahdi/system.conf -s Only shutdown spans. -f Always configure every channel, even if it appears not to have changed. -t Test mode. Don't do anything, just report what you wanted to do. -v Be more verbose. Add extra v-s for extra verbosity. -h Display a brief help message.


/etc/dahdi/system.conf The default location for the configuration file.
dahdi_tool(8), dahdi_monitor(8), asterisk(8).
This manual page was written by Santiago Ruano Rincon <santiago@unicauca.edu.co> for the Debian system (but may be used by others). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation. 16 Jun 2008 DAHDI_CFG(8)

Copyright © 2011–2018 by topics-of-interest.com . All rights reserved. Hosted by all-inkl.
Contact · Imprint · Privacy

Page generated in 26.66ms.

meinehunde.net | und-verkauft.de | dfptutorial.com