go to
> getsockopt(2)
> setsockopt(2)
> ax25(4)
> axctl(8)
> axports(5)
Homepage > Man Pages > Category > Maintenance Commands
Homepage > Man Pages > Name > A

axparms

man page of axparms

axparms: Configure AX.25 interfaces.

NAME

axparms - Configure AX.25 interfaces.

SYNOPSIS

axparms -assoc|-forward|-route|-setcall|-version ...
DESCRIPTION
The axparms command is designed to be a multi-function command that allows miscellaneous commands to be issued to the Linux AX.25 protocol layer. It includes the functionality of axassociate and axsetcall which this command superceedes. The different modes of the command are chosen by the first argument. Sunsequent arguments depend upon this argument and so no generalised command format can be given.
-ASSOC ARGUMENT
The format of this option is: axparms -assoc <callsign> <username> axparms -assoc <callsign> delete axparms -assoc policy [default|deny] axparms -assoc show This option mainpulates the kernel uid/callsign mapping table, allowing callsigns to be associated and dis-associated with a user. The policy option permits the superuser to have all other uid's either default to the actual port name, or to block traffic. At power up the table is blank and the policy is 'default', which is thus backward compatible.

-FORWARD ARGUMENT

Allows the use of many receivers with one transmitter, known as packet forwarding in many systems. The format of this command is: axparms -forward <portfrom> <portto> axparms -forward <portfrom> delete Any packets to be transmitted on port portfrom will be transmitted on port portto. This will stay in force until the second form of the command is issued which will remove the association.

-ROUTE ARGUMENT

This option allows the internal AX.25 routing table to be manipulated. This table is available for reading in /proc/net/ax25_route, and will be built up dynamically by stations heard. However it is possible to add, delete and list entries via this option. The formats of this option are: axparms -route add <port> <callsign> [<digis>] [-ipmode V|D] axparms -route del <port> <callsign> axparms -route list Routes added via this command will not be removed from the internal routing table when they are "old" as normal entries are. The -ipmode option sets mode vc or mode datagram for this destination. If the <callsign> argument is set to "default" then this will set the default route for all outgoing AX.25 connections which will be used when there is no specific route to the required destination.

-SETCALL ARGUMENT

The format of this option is: axparms -setcall <serial-device> <callsign> This changes the callsign associated with the given serial device in KISS mode. The change is permanent until the link is downed or another "axparms -setcall" is made. The interface must already have been attached with kissattach to use this option.

-VERSION ARGUMENT

This option displays the version of the AX.25 utilities that axparms belongs to.
FILES
/proc/net/ax25_bpqether /proc/net/ax25_calls /etc/ax25/axports
SEE ALSO
call(1), getsockopt(2), setsockopt(2), ax25(4), axctl(8), axports(5).

AUTHORS

Alan Cox GW4PTS <alan@cymru.net> Jonathan Naylor G4KLX <g4klx@g4klx.demon.co.uk> Joerg Reuter DL1BKE <jreuter@poboxes.com> AXPARMS(8)
 
 
 

Copyright © 2011–2018 by topics-of-interest.com . All rights reserved. Hosted by all-inkl.
Contact · Imprint · Privacy

Page generated in 47.31ms.

doomsdaydude.com | dfptutorial.com | elternfragen.net