go to
> amanda(8)
> amcheck(8)
Homepage > Man Pages > Category > Maintenance Commands
Homepage > Man Pages > Name > A

amcheckdump

man page of amcheckdump

amcheckdump: check the results of an Amanda dump

NAME
amcheckdump - check the results of an Amanda dump
SYNOPSIS
amcheckdump [--timestamp|-t timestamp] [--verbose] [-o configoption...] config

DESCRIPTION

Amcheckdump verifies Amanda dump images by reading them from storage volume(s) and verifying that the images can be parsed by the appropriate application (if available). For example, a GNUTAR image is passed to GNU Tar for parsing, and any errors (e.g., corrupt or missing data) are noted. The application runs on the most recent dump or, if --timestamp is specified, on the most recent dump with that timestamp. Note that the verification is local to the Amanda server; if the dump application is not available, or is configured differently on the server than on the client, then the verification will most likely fail. If a changer is available, it is used to load the required tapes. Otherwise, the application interactively requests the tapes. See the "CONFIGURATION OVERRIDE" section in amanda(8) for information on the -o option.

EXAMPLE

# check the most recent dump amcheckdump MYCONFIG # check a specific dump from back in '78 amcheckdump MYCONFIG --timestamp 19780615

SEE ALSO

amanda(8), amcheck(8) The Amanda Wiki: : //wiki.zmanda.com/

AUTHOR

Ian Turner <ian@zmanda.com> Zmanda, Inc. AMCHECKDUMP(8)
 
 
 

Copyright © 2011–2018 by topics-of-interest.com . All rights reserved. Hosted by all-inkl.
Contact · Imprint · Privacy

Page generated in 23.32ms.

laufbaender.name | schuhefinden.de | Bedingt Wichtige Versicherungen