go to
> mii-diag(8)
Homepage > Man Pages > Category > Maintenance Commands
Homepage > Man Pages > Name > Other


man page of 3c515-diag

3c515-diag: setup and diagnostic program for the 3Com 3c515 Ethernet cards.


3c515-diag - setup and diagnostic program for the 3Com 3c515 Ethernet cards.


3c515-diag [options]


3c515-diag is a program that you can use to diagnose problems with 3Com 3c515 ethercards as well as reconfiguring it.
These programs follow the usual GNU command line syntax, with long options starting with two dashes ('-'). A summary of options is included below. -h, --help Show summary of options. -V, --version Show version of program. -v, --verbose Verbose mode. -q, --quiet Be very unverbose. -a, --all Print all registers. -p, --base-address <port> Specify port to use. Valid values are: 0x240, 0x280, 0x300, 0x320, 0x340, 0x360 -f, --interface <interface> Interface number. Valid Options are: 10baseT, 10base2, and 10Mbs AUI. -Q, -i, --irq <irq> Specify new interrupt. Valid values are: 3-5,7,9-15. -w, --write-EEPROM <values> Write to the EEPROMS with the specified values.


This manual page was written by Alain Schroeder <alain@debian.org>, for the Debian GNU/Linux system (but may be used by others). February 23, 2001 3C515-DIAG(8)

Copyright © 2011–2018 by topics-of-interest.com . All rights reserved. Hosted by all-inkl.
Contact · Imprint · Privacy

Page generated in 23.17ms.

amazing-wings.de | backbar.es | adsenseexperts.com