go to
> ax25ipd(8)
Homepage > Man Pages > Category > File Formats
Homepage > Man Pages > Name > A

ax25ipd.conf

man page of ax25ipd.conf

ax25ipd.conf: Control the operation of ax25ipd.

NAME

ax25ipd.conf - Control the operation of ax25ipd.

DESCRIPTION

The ax25ipd.conf file controls the operation of the ax25ipd(8) program. The operation of the config file can best be seen in an example: # # ax25ipd configuration file for station floyd.vk5xxx.ampr.org # # Select axip transport. 'ip' is what you want for compatibility # with most other gates ... # socket ip # # Set ax25ipd mode of operation. (digi or tnc) # mode tnc # # If you selected digi, you must define a callsign. If you selected # tnc mode, the callsign is currently optional, but this may change # in the future! (2 calls if using dual port kiss) # # mycall vk5xxx-4 # mycall2 vk5xxx-5 # # In digi mode, you may use an alias. (2 for dual port) # # myalias svwdns # myalias2 svwdn2 # # Send an ident every 540 seconds ... # # beacon after 540 # btext ax25ip -- tncmode rob/vk5xxx -- Experimental AXIP gateway # # Serial port, or pipe connected to a kissattach in my case # device /dev/ttyp0 # # Set the device speed # speed 9600 # # loglevel 0 - no output # loglevel 1 - config info only # loglevel 2 - major events and errors # loglevel 3 - major events, errors, and AX25 frame trace # loglevel 4 - all events # log 0 for the moment, syslog not working yet ... # loglevel 4 # # If we are in digi mode, we might have a real tnc here, so use param to # set the tnc parameters ... # # param 1 20 # # Broadcast Address definition. Any of the addresses listed will be forwarded # to any of the routes flagged as broadcast capable routes. # broadcast QST-0 NODES-0 # # ax.25 route definition, define as many as you need. # format is route (call/wildcard) (ip host at destination) # ssid of 0 routes all ssid's # # route <destcall> <destaddr> [flags] # # Valid flags are: # b - allow broadcasts to be transmitted via this route # d - this route is the default route # route vk2sut-0 44.136.8.68 b route vk5asf 44.136.188.221 b route vk2abc 44.1.1.1 d # # More to come ...

FILES

/etc/ax25/ax25ipd.conf

SEE ALSO

ax25ipd(8). AX25IPD.CONF(5)
 
 
 

Copyright © 2011–2018 by topics-of-interest.com . All rights reserved. Hosted by all-inkl.
Contact · Imprint · Privacy

Page generated in 20.59ms.

kostenlose Artikel | Ich brauche eine Krankenzusatzversicherung | Internet and Network