go to
> lpt(4)
> usb(4)
Homepage > Man Pages > Category > Special Files
Homepage > Man Pages > Name > U

ulpt

man page of ulpt

ulpt: USB printer support

NAME

ulpt - USB printer support

SYNOPSIS

To compile this driver into the kernel, place the following line in your kernel configuration file: device ulpt Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): ulpt_load="YES"

DESCRIPTION

The ulpt driver provides support for USB printers that follow the printer bi- or uni-directional protocol. The bits in the minor number select various features of the driver. Minor Bit Function 64 Do not initialize (reset) the device on the port. Some printers cannot handle the reset on open; in case of problems try the unlpt device.

HARDWARE

The ulpt driver provides support for USB printers and parallel printer conversion cables, including the following: +
FILES
/dev/ulpt? device with reset /dev/unlpt? device without reset
SEE ALSO
lpt(4), usb(4)

HISTORY

The ulpt driver appeared in NetBSD 1.4. This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002. ULPT(4)
 
 
 

Copyright © 2011–2018 by topics-of-interest.com . All rights reserved. Hosted by all-inkl.
Contact · Imprint · Privacy

Page generated in 27.99ms.

und-verkauft.de | amazing-wings.de | Nur Wichtige Versicherungen