go to
> Xorg(1)
> xorg.conf(5)
> Xserver(1)
> X(7)
Homepage > Man Pages > Category > Special Files
Homepage > Man Pages > Name > A

apm

man page of apm

apm: Alliance ProMotion video driver

NAME

apm - Alliance ProMotion video driver

SYNOPSIS

Section "Device" Identifier "devname Driver "apm" ... EndSection
DESCRIPTION
apm is an Xorg driver for Alliance ProMotion video cards. The driver is accelerated for supported hardware/depth combination. It supports framebuffer depths of 8, 15, 16, 24 and 32 bits. For 6420, 6422, AT24, AT3D and AT25, all depths are fully accelerated except 24 bpp for which only screen to screen copy and rectangle filling is accelerated.
SUPPORTED HARDWARE
The apm driver supports PCI and ISA video cards on the following Alliance ProMotion chipsets ProMotion 6420 ProMotion 6422 AT24 AT3D AT25

CONFIGURATION DETAILS

Please refer to xorg.conf(5) for general configuration details. This section only covers configuration details specific to this driver. The driver auto-detects the chipset type, but the following ChipSet names may optionally be specified in the config file "Device" section, and will override the auto-detection: "6422", "at24", "at3d". The AT25 is Chipset "at3d" and the 6420 is 6422. The driver will auto-detect the amount of video memory present for all chips. The actual amount of video memory can also be specified with a VideoRam entry in the config file "Device" section. The following driver Options are supported: Option "HWCursor" "boolean Enable or disable the hardware cursor. Default: on. Option "NoAccel" "boolean Disable or enable acceleration. Default: acceleration is enabled. Option "NoLinear" "boolean Disable or enable use of linear frame buffer. Default: on. Note: it may or may not work. Tell me if you need it. Option "PciRetry" "boolean Enable or disable PCI retries. Default: off. Option "Remap_DPMS_On" "string Option "Remap_DPMS_Standby" "string Option "Remap_DPMS_Suspend" "string Option "Remap_DPMS_Off" "string Remaps the corresponding DPMS events. I've found that my Hercules 128/3D swaps Off and Suspend events. You can correct that with Option "Remap_DPMS_Suspend" "Off" Option "Remap_DPMS_Off" "Suspend" in the Device section of the config file. Option "SWCursor" "boolean Force the software cursor. Default: off. Option "ShadowFB" "boolean Enable or disable use of the shadow framebuffer layer. Default: off.

SEE ALSO

Xorg(1), xorg.conf(5), Xserver(1), X(7)

AUTHORS

Authors include: ... APM(4)
 
 
 

Copyright © 2011–2018 by topics-of-interest.com . All rights reserved. Hosted by all-inkl.
Contact · Imprint · Privacy

Page generated in 26.03ms.

Ermitteln Sie Ihre IP-Adresse schnell und einfach | Ausf├╝hrliches RapidResponseBot Review | information-information.de