NAMEytalk - A multi-user chat program.
SYNOPSISytalk [-s] [-Y] [-E] [-i] [-q] [-v] [-h hostname_or_ip] username...
DESCRIPTIONYTalk 3.3.0 YTalk is in essence a multi-user chat program. It works almost exactly like the UNIX talk program and even communicates with the same talk daemon(s), but YTalk allows for multiple connections. The username field may be formatted in several different ways: name - some user on your machine name@host - some user on a different machine name#tty - some user on a particular terminal name#tty@host - some user on a particular tty on a different machine name@host#tty - same as "name#tty@host" aliasname - an alias defined in your .ytalkrc You can specify multiple user names on the command line, ie: ytalk george firstname.lastname@example.org email@example.com The -s option starts your YTalk window in a shell. The -Y option requires a capital Y or N as an answer to any yes/no question. The -E option requires you to press escape once before answering a yes/no question (for people who type looking at the keyboard). The -i option disables the auto-invite port (meaning you won't see "talk to firstname.lastname@example.org", but your talk daemon will beep you instead). The -q option causes YTalk to prompt you before quitting. The -v option prints the program version and exits. The -h option specifies the name or address of the local machine; this is useful on multi-homed machines, or virtual hosts, to specify which network interface to use for communication. For each user on the command line, YTalk will attempt to connect to the talk daemon on the specified user's host and determine if that user has left an invitation for you to call. If not, YTalk leaves an invitation for him and tells his talk daemon to send an announcement to his screen. There is no dedicated YTalk daemon. Right now, YTalk is able to communicate with BOTH existing versions of UNIX talk daemons. For any particular host, YTalk will attempt to communicate with a talk daemon the caller's host also supports. If the two hosts have no daemon in common, then UNIX talk will not function at all, but a connection is possible through (and only through) YTalk. Once a connection has been established between two users, they can chat back and forth to their hearts' content. The connection is terminated when one of them hits control-C or selects quit off the main menu. YTalk is perfectly compatible with UNIX talk and they can even converse with each other without any problems. However, many of the features of YTalk can only operate when you are connected to a user who is also using YTalk. For the rest of this document, it will be assumed that all connected users are using YTalk, unless otherwise stated. If you specified more than one user on the YTalk command line, then YTalk will process and add each user to the conversation as they respond to your invitation. As each new user enters the conversation, the screen is further subdivided into smaller and smaller windows, one for each connected user. Right now, the number of connected users is limited by the number of lines on your terminal (or window), for each connected user needs at least three lines. As each new user is added to the conversation, YTalk will transmit information about that user to all other connected YTalk users so that their screens will also subdivide and incorporate the new user. If the new user is using UNIX talk, then information about him will NOT be transmitted, for his screen would be unable to accept multiple connections. I have given brief thought to allowing at least the output of UNIX talk users to be transmitted to all connected YTalk users, but I have not written any code to do so. Note that even though UNIX talk cannot handle multiple connections, it is still possible for YTalk to handle multiple UNIX "talk" connections. For example, george (using YTalk) could communicate with fred and joe (both using UNIX talk), but fred and joe would be unaware of each other. The best way to understand the limitations that UNIX "talk" places on YTalk is to test various connections between the two and see how things work.
ESCAPE MENUWhenever you are using YTalk, you can hit the ESCAPE key to bring up a menu which at this moment has these options: a: add a user d: delete a user k: kill all unconnected o: options r: rering all s: shell u: user list w: output user to file q: quit By choosing option "a", you are given the opportunity to type the name of any user you wish to include into the conversation. Again, YTalk will accept an invitation from that user if an invitation exists, or will leave an invitation and ring the given user. By choosing option "d", you can select the name of a connection to terminate. By choosing option "k", you can make YTalk forget all pending (waiting) connections. By choosing option "o", you can view and/or modify any of the YTalk options. See the OPTIONS section below for a list of YTalk options. By choosing option "r", all users that have not yet responded to your talk invitation will be re-rung. By choosing option "s", you can invoke a shell in your YTalk window. All other users will see what happens in your shell. YTalk will automatically resize your window down to the size of the smallest window you are connected to, in order to ensure that all users always see the same thing. The "u" option displays a list of connected and unconnected users, as well as their window sizes and what version of talk software they are running. By choosing option "w", you can select any connected user and type the name of a file, and all further output from that user will be dumped to the specified file. The file, if it exists, will be OVERWRITTEN. By choosing "w" and the same user again, further output to the file will be terminated. Oh, one other thing: when user A attempts to ytalk to user B, but user B is already ytalking with user C, user A's YTalk program will realize that user B is already using YTalk, and will communicate with user B's YTalk program directly in order to initialize the conversation. User B will see a nice windowed message like: Do you wish to talk with user A? and he will be prompted for a yes/no answer. This, in my opinion, is much preferable to blitting the announcement message and messing up user B's screen. The command-line option "-i" turns this off.
RUNTIME OPTIONSWhen you select Options off of the main menu, you are given the opportunity to edit the YTalk options. The current options are: s: turn scrolling [off/on] w: turn word-wrap [off/on] i: turn auto-import [off/on] v: turn auto-invite [off/on] r: turn reringing [off/on] p: [don't] prompt before rerings q: [don't] prompt before quitting If scrolling is turned on, then a user's window will scroll when he reaches the bottom, instead of wrapping back around to the top. If word-wrap is turned on, then any word which would overextend the right margin will be automatically moved to the next line on your screen. If auto-import is turned on, then YTalk will assume that you wish to talk to any users which connect to other YTalk users which are connected to you. That last sentence does make sense; try again. YTalk will add these users to your session automatically, without asking you for verification. If auto-invite is turned on, then YTalk will automatically accept any connection requested by another user and add them to your session. You will not be asked for verification. If rering is turned on, then YTalk will re-ring any user who does not respond to your invitation within 30 seconds. If prompt-rering is turned on, then YTalk will ask you before re- ringing a user. If prompt-quit is turned on, then YTalk will wait for keyboard input before quitting. Any of these options can be set to your preference in your .ytalkrc file, as described below.
YTALK STARTUP FILEIf your home directory contains a file named ".ytalkrc" then YTalk will read this file while starting up. All YTalk runtime options, as well as some startup options, can be set in this file. SETTING BOOLEAN OPTIONS Boolean options can be pre-set with the following syntax: turn option [off | on] where option is one of scrolling , word-wrap , auto-import , auto- invite , rering , prompt-rering , prompt-quit , caps , escape-yesno , noinvite , ignorebreak , or beeps . Setting these options works just like described above. For example, one could enable word-wrap with the line: turn word-wrap on ALIASES You can setup aliases so you don't have to type the full address of the user you want to ring. There are three types of aliases: alias aliasname@ username@ Replaces aliasname@host with username@host for every host. The '@' at the end of username@ is not required. alias @aliashost @realhost Replaces user@aliashost with user@realhost for every user. The '@' at the beginning of @realhost is not required. alias aliasname user@host Replaces aliasname with user@host. SELECTING INTERFACES AND VIRTUAL HOSTS On machines with multiple IP addresses (multiple interfaces, or virtual hosts), you can choose the default address to use for communication with YTalk, using the localhost command in your .ytalkrc file. The syntax is: localhost hostname-or-IP-address SETTING RE-ADDRESS MODES The purpose of readdressing is to allow YTalk connections across point- to-point network gateways where the local machines know themselves by a different address (and typically hostname) than the remote machines. The basic syntax of a readdress command is this: readdress from-address to-address domain The readdress statement simply makes a claim that the machine(s) in domain communicate with the machine(s) at from-address by sending a packet to to-address . Since most users have no use for this whatsoever, I'll describe it only briefly. THIS IS NOT ROUTING. For example, my machine at home is connected via PPP to the network at my office. My machine at home thinks its ethernet address is 22.214.171.124 and its hostname is "talisman.com". The network at my office has the address 126.96.36.199. When I'm connected via PPP, my home machine is placed into the office network as address 188.8.131.52 with hostname "talisman.austin.eds.com". YTalk needs to know that if it is running on domain 184.108.40.206 and receives packets from 220.127.116.11 that it should respond to 18.104.22.168, not 22.214.171.124. right? right. okay, okay, okay. I put this line into my .ytalkrc on both ends: readdress talisman talisman.austin.eds.com 126.96.36.199 On my home end, this translates to: readdress 188.8.131.52 184.108.40.206 220.127.116.11 which tells my home machine to advertise itself as "18.104.22.168" instead of "22.214.171.124" when YTalk-ing to machines on the network "126.96.36.199". On the office end, the readdress command translates to: readdress 188.8.131.52 184.108.40.206 220.127.116.11 which the office machines basically ignore. Note that, in this case, the problem could also have been solved by telling the home YTalk to use the 18.104.22.168 interface, when doing YTalk requests across the PPP link.
FILES/usr/local/etc/ytalkrc System-wide defaults file. ~/.ytalkrc User's local configuration file. This file overrides options set in the system ytalkrc file.
CURRENT MAINTAINERAndreas Kling <email@example.com>
ORIGINAL AUTHORBritt Yenne
PAST MAINTAINERSRoger Espel Llima Jessica Peterson
CONTRIBUTORSSpecial thanks to Carl Edman for numerous code patches, beta testing, and comments. I think this guy spends as much time on ytalk as I do. Special thanks to Tobias Hahn and Geoff W. for beta testing and suggestions. Thanks to Sitaram Ramaswamy for the original YTalk manpage. Thanks to Magnus Hammerin for Solaris 2.* support. Thanks to Thilo Wunderlich for Linux support. Thanks to Jonas Yngvesson for aside messages in X. Thanks to Andreas Stolcke for fixing the X resource database calls. Thanks to Pete Wenzel for fixing the #elif directive. Thanks to John Vanderpool, Shih-Chen Huang, Andrew Myers, Duncan Sinclair, Evan McLean, Larry Schwimmer, J. Adam Hawkes, and Mark Musone for comments and ideas. Thanks to Steve McIntyre for patches and ideas. Thanks to Katarina Erkkonen for CVS hosting. Thanks to Alexander Rigbo for patches, testing and many good ideas.
BUGSPlease mail any bugs to the maintainer of this version, at <firstname.lastname@example.org>
LICENSEThis program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. YTALK(1)