NAMEmd5deep - Compute and compare MD5 message digests sha1deep - Compute and compare SHA-1 message digests sha256deep - Compute and compare SHA-256 message digests tigerdeep - Compute and compare Tiger message digests whirlpooldeep - Compute and compare Whirlpool message digests
SYNOPSISmd5deep -v | -V | -h md5deep [-m|-M|-x|-X <file>] [-a|-A <hash>] [-f <file>] [-p <size>] [-i <size>] [-tnwzresS0lbkqZ] [-o <fbcplsd>] [FILES]
DESCRIPTIONComputes the hashes, or message digest, for any number of files while optionally recursively digging through the directory structure. Can also take a list of known hashes and display the filenames of input files whose hashes either do or do not match any of the known hashes. Errors are reported to standard error. If no FILES are specified, reads from standard input. -p <size> Piecewise mode. Breaks files into chunks before hashing. Chunks may be specified using IEC multipliers b, k, m, g, t, p, or e. (Never let it be said that the author didn't plan ahead!) This mode cannot be used with the -z mode. -i|-I <size> Size threshold mode. Only hash files smaller than the given the threshold. In -i mode, simply omits those files larger than the threshold. In -I mode, displays all files, but uses asterisks for the hashes of files larger than the threshold. Sizes may be specified using IEC multipliers b, k, m, g, t, p, or e. -r Enables recursive mode. All subdirectories are traversed. Please note that recursive mode cannot be used to examine all files of a given file extension. For example, calling md5deep -r *.txt will examine all files in directories that end in .txt. -e Displays a progress indicator and estimate of time remaining for each file being processed. Time estimates for files larger than 4GB are not available on Windows. This mode may not be used with th -p mode. -m <file> Enables matching mode. The file given should be a list of known hashes. The input files are examined one at a time, and only those files that match the list of known hashes are output. This flag may be used more than once to add multiple sets of known hashes. Acceptable formats for lists of known hashes are plain (such as those generated by md5deep or md5sum), Hashkeeper files, iLook, and the National Software Reference Library (NSRL) as produced by the National Institute for Standards in Technology. If standard input is used with the -m flag, displays "stdin" if the input matches one of the hashes in the list of known hashes. If the hash does not match, the program displays no output. This flag may not be used in conjunction with the -x, -X, or -A flags. See the section "UNICODE SUPPORT" below. -x <file> Same as the -m flag above, but does negative matching. That is, only those files NOT in the list of known hashes are displayed. This flag may not be used in conjunction with the -m, -M, or -a flags. See the section "UNICODE SUPPORT" below. -M and -X <file> Same as -m and -x above, but displays the hash for each file that does (or does not) match the list of known hashes. -a <hash> Adds a single hash to the list of known hashes used for matching mode, and if not already enabled, enables matching mode. Adding single hashes cannot, by itself, be used to print the hashes of matching files like the -M flag does. When used in conjunction with the -w flag, the filename displayed is just the hash submitted on the command line. This flag may not be used in conjunction with the -x, -X, or -A flags. -A <hash> Same as -a above, but does negative matching. This flag may not be used in conjunction with the -m, -M, or -A flags. -f <file> Takes a list of files to be hashed from the specified file. Each line is assumed to be a filename. This flag can only be used once per invocation. If it's used a second time, the second instance will clobber the first. Note that you can still use other flags, such as the -m or -x modes, and submit additional FILES on the command line. -w During any of the matching modes (-m,-M,-x,or -X), displays the filename of the known hash that matched the input file. See the section "UNICODE SUPPORT" below. -t Display a timestamp in GMT with each result. On Windows this timestamp will be the file's creation time. On all other systems it should be the file's change time. -n During any of the matching modes (-m,-M,-x,or -X), displays only the filenames of any known hashes that were not matched by any of the input files. -s Enables silent mode. All error messages are supressed. -S Like silent mode, but still displays warnings on improperly formatted hashes in the list of known hashes. -z Enables file size mode. Prepends the hash with a ten digit representation of the size of each file processed. If the file size is greater than 9999999999 bytes (about 9.3GB) the program displays 9999999999 for the size. -q Quiet mode. File names are omitted from the output. -Z Produces output in Triage format. Each line contans the file's size, a tab, a hash of the first 512 bytes, a tab, the hash of the complete file, a tab, and the file name. These values are intended in increasing order of specificity. That is, two files with different sizes cannot possibly match. This is a fast comparison and should be done first. Next, two files with different partial hashes cannot possibly match. This is often faster than hashing the whole file. Finally, if those two pieces align, then it's worth reading and hashing the entire file. -0 Uses a NULL character (/0) to terminate each line instead of a newline. Useful for processing filenames with strange characters. -l Enables relative file paths. Instead of printing the absolute path for each file, displays the relative file path as indicated on the command line. This flag may not be used in conjunction with the -b flag. -b Enables bare mode. Strips any leading directory information from displayed filenames. This flag may not be used in conjunction with the -l flag. -k Enables asterisk mode. An asterisk is inserted in lieu of a second space between the filename and the hash, just like md5sum in its binary (-b) mode. -c Enables comma separated values output, or CSV mode. This mode has the side effect of removing the 10 digit size limitation from -z mode. Also note that asterisks from -k mode are not displayed when in CSV mode. -o <bcpflsd> Enables expert mode. Allows the user specify which (and only which) types of files are processed. Directory processing is still controlled with the -r flag. The expert mode options allowed are: f - Regular files b - Block Devices c - Character Devices p - Named Pipes l - Symbolic Links s - Sockets d - Solaris Doors -h Show a help screen and exit. -v Show the version number and exit. -V Show copyright information and exit.
UNICODE SUPPORTAs of version 2.0 the program supports Unicode characters in filenames on Microsoft Windows systems. Due to limitations in Windows, however, each Unicode character is represented as a question mark (?) in the output. Note that Unicode characters are not supported in the files containing known hashes. You can specify a file of known hashes that has Unicode characters in its name by using tab completition or an asterisk (e.g. md5deep -m *.txt where there is only one file with a .txt extension).
RETURN VALUEReturns a bit-wise value based on the success of the operation and the status of any matching operations. 0 Success. Note that the program considers itself successful even when it encounters read errors, permission denied errors, or finds directories when not in recursive mode. 1 Unused hashes. Under any of the matching modes, returns this value if one or more of the known hashes was not matched by any of the input files. 2 Unmatched inputs. Under any of the matching modes, returns this value if one or more of the input values did not match any of the known hashes. 64 User error, such as trying to do both positive and negative matching at the same time. 128 Internal error, such as memory corruption or uncaught cycle. All internal errors should be reported to the developer! See the section "Reporting Bugs" below.
AUTHORmd5deep was written by Jesse Kornblum, email@example.com.
KNOWN ISSUESUsing the -r flag cannot be used to recursively process all files of a given extension in a directory. This is a feature, not a bug. If you need to do this, use the find(1) command.
REPORTING BUGSWe take all bug reports very seriously. Any bug that jeopardizes the forensic integrity of this program could have serious consequenses on people's lives. When submitting a bug report, please include a description of the problem, how you found it, and your contact information. Send bug reports to the author at the address above.
COPYRIGHTThis program is a work of the US Government. In accordance with 17 USC 105, copyright protection is not available for any work of the US Government. This program is PUBLIC DOMAIN. Portions of this program contain code that is licensed under the terms of the General Public License (GPL). Those portions retain their original copyright and license. See the file COPYING for more details. There is NO warranty for this program; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
SEE ALSOMore information and installation instructions can be found in the README file. Current versions of both documents can be found on the project homepage: //md5deep.sourceforge.net/ The MD5 specification, RFC 1321, is available at //www.ietf.org/rfc/rfc1321.txt The SHA-1 specification, RFC 3174, is available at //www.faqs.org/rfcs/rfc3174.html The SHA-256 specification, FIPS 180-2, is available at //csrc.nist.gov/publications/fips/fips180-2/fips180-2.pdf The Tiger specification is available at //www.cs.technion.ac.il/~biham/Reports/Tiger/ The Whirlpool specification is available at //planeta.terra.com.br/informatica/paulobarreto/WhirlpoolPage.html MD5DEEP(1)