Homepage > Man Pages > Category > General Commands
Homepage > Man Pages > Name > V


man page of vdr-sxfe

vdr-sxfe: Remote X-Server frontend for vdr-plugin-xineliboutput


vdr-sxfe - Remote X-Server frontend for vdr-plugin-xineliboutput


vdr-sxfe [options] [xvdr[+udp|+tcp|+rtp]:[//host[:port]]]
vdr-sxfe is a X/Xv/XvMc remote frontend, that plays back streams provided by vdr-plugin-xineliboutput.
--help Show (this) help message --audio=audiodriver[:device] Select audio driver and optional port --video=videodriver[:device] Select video driver and optional port As far as supported, possible video drivers might be: xshm, xv, xvmc, xxmc, vidix, XDirectFB, opengl, sdl or none --display=displayaddress X11 display address --wid=id Use existing X11 window --aspect=[auto|4:3|16:9|16:10|default] Display aspect ratio (You can us a script to control the HW aspect ratio: --aspect=auto:path_to_script) --fullscreen Fullscreen mode --hud Head Up Display OSD mode --width=x Video window width --height=x Video window height --noscaling Disable all video scaling --post=name[:arg=val[,arg=val]] Load and use xine post plugins, e.g.: o --post=upmix o --post=upmix;tvtime:enabled=1,cheap_mode=1) --lirc[=devicename] Use lirc input device Optional lirc socket name can be given --verbose Verbose debug output --silent Silent mode (report only errors) --syslog Write all output to system log --nokbd Disable keyboard input --daemon Run as daemon (disable keyboard, log to syslog and fork to background) --slave Enable slave mode (read commands from stdin) --reconnect Automatically reconnect when connection has been lost --tcp, --udp, --rtp Use TCP, UDP or RTP transport If no transport options are given, transports are tried in following order: local pipe, rtp, udp, tcp


Search for VDR (xineliboutput) server, connect to it and negotiate best available transport, use best available audio: vdr-sxfe Connect to default port and negoate best available transport: vdr-sxfe xvdr:// Connect to, port 12550 and use TCP transport: vdr-sxfe xvdr+tcp:// Automatically search for VDR server and use UDP transport: vdr-sxfe xvdr+udp: vdr-syfe --udp Use alsa: vdr-sxfe --audio alsa Use alsa (and specific card/sub-device): vdr-sxfe --audio alsa:plughw:1,1 Video driver (and display / device): vdr-sxfe --video xv vdr-sxfe --video xvmc:


If deinterlacing post plugin options are not given at command line, deinterlacing is controlled by VDR plugin configuration menu settings. De-interlacing can also be forced on or off with command-line option "--post tvtime". Examples: vdr-sxfe --post tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 vdr-sxfe --post tvtime:enable=0


This manual page was written by Tobias Grimm <etobi@debian.org> 03 July 2011 VDR-SXFE(1)

Copyright © 2011–2018 by topics-of-interest.com . All rights reserved. Hosted by all-inkl.
Contact · Imprint · Privacy

Page generated in 25.01ms.

Website Promotion | brennholz-eichelberg.de | brieftauben-versteigerung.com