go to
> pulseaudio(1)
> pactl(1)
Homepage > Man Pages > Category > General Commands
Homepage > Man Pages > Name > P

pacat

man page of pacat

pacat: Play back or record raw or encoded audio streams on a PulseAudio sound server

NAME
pacat - Play back or record raw or encoded audio streams on a PulseAudio sound server
SYNOPSIS
paplay [options] [FILE] parecord [options] [FILE] pacat [options] [FILE] parec [options] [FILE] pamon [options] [FILE] pacat --help pacat --version

DESCRIPTION

pacat is a simple tool for playing back or capturing raw or encoded audio files on a PulseAudio sound server.

OPTIONS

-h | --help Show help. --version Show version information. -r | --record Capture audio data and write it to the specified file or to STDOUT if none is specified. If the tool is called under the name parec this is the default. -p | --playback Read audio data from the specified file or STDIN if none is specified, and play it back. If the tool is called under the name pacat this is the default. -v | --verbose Enable verbose operation. Dumps the current playback time to STDERR during playback/capturing. -s | --server=SERVER Choose the server to connect to. -d | --device=SINKORSOURCE Specify the symbolic name of the sink/source to play/record this stream on/from. -n | --client-name=NAME Specify the client name paplay shall pass to the server when connecting. --stream-name=NAME Specify the stream name paplay shall pass to the server when creating the stream. --volume=VOLUME Specify the initial playback volume to use. Choose a value between 0 (silent) and 65536 (100% volume). --rate=SAMPLERATE Capture or play back audio with the specified sample rate. Defaults to 44100 Hz. --format=FORMAT Capture or play back audio with the specified sample format. Specify one of u8, s16le, s16be, s32le, s32be, float32le, float32be, ulaw, alaw, s32le, s32be, s24le, s24be, s24-32le, s24-32be. Depending on the endianess of the CPU the formats s16ne, s16re, s32ne, s32re, float32ne, float32re, s32ne, s32re, s24ne, s24re, s24-32ne, s24-32re (for native, resp. reverse endian) are available as aliases. Defaults to s16ne. --channels=CHANNELS Capture or play back audio with the specified number of channels. If more than two channels are used it is recommended to use the --channel-map option below. Defaults to 2. --channel-map=CHANNELMAP Explicitly choose a channel map when playing back this stream. The argument should be a comma separated list of channel names: front-left, front-right, mono, front-center, rear-left, rear- right, rear-center, lfe, front-left-of-center, front-right-of- center, side-left, side-right, top-center, top-front-center, top-front-left, top-front-right, top-rear-left, top-rear-right, top-rear-center, or any of the 32 auxiliary channel names aux0 to aux31. --fix-format If passed, the sample format of the stream is changed to the native format of the sink the stream is connected to. --fix-rate If passed, the sampling rate of the stream is changed to the native rate of the sink the stream is connected to. --fix-channels If passed, the number of channels and the channel map of the stream is changed to the native number of channels and the native channel map of the sink the stream is connected to. --no-remix Never upmix or downmix channels. --no-remap Never remap channels. Instead of mapping channels by their name this will match them solely by their index/order. --latency=BYTES Explicitly configure the latency, with a time specified in bytes in the selected sample format. If left out the server will pick the latency, usually relatively high for power saving reasons. Use either this option or --latency-msec, but not both. --latency-msec=MSEC Explicitly configure the latency, with a time specified in miliseconds. If left out the server will pick the latency, usually relatively high for power saving reasons. Use either this option or --latency, but not both. --process-time=BYTES Explicitly configure the process time, with a time specified in bytes in the selected sample format. If left out the server will pick the process time. Use either this option or --process-time- msec, but not both. --process-time-msec=MSEC Explicitly configure the process time, with a time specified in miliseconds. If left out the server will pick the process time. Use either this option or --process-time, but not both. --property=PROPERTY=VALUE Attach a property to the client and stream. May be used multiple times --raw Play/record raw audio data. This is the default if this program is invoked as pacat , parec or pamon --file-format[=FFORMAT] Play/record encoded audio data in the file format specified. This is the default if this program is invoked as paplay and parecord --list-file-formats List supported file formats.

AUTHORS

The PulseAudio Developers <mzchyfrnhqvb (at) 0pointer (dot) net>; PulseAudio is available from //pulseaudio.org/

SEE ALSO

pulseaudio(1), pactl(1) PACAT(1)
 
 
 

Copyright © 2011–2018 by topics-of-interest.com . All rights reserved. Hosted by all-inkl.
Contact · Imprint · Privacy

Page generated in 56.57ms.

information-information.de | tier-bedarf.com | Internet and Network