NAMEocaml.m4 - Autoconf macros for OCaml
SUMMARYAC_PROG_OCAML AC_PROG_FINDLIB AC_PROG_OCAMLLEX AC_PROG_OCAMLYACC AC_PROG_CAMLP4 AC_CHECK_OCAML_PKG([name]) AC_CHECK_OCAML_MODULE(VARIABLE,NAME,MODULE,INCLUDE-PATHS) AC_CHECK_OCAML_WORD_SIZE
DESCRIPTIONocaml.m4 is a file containing standard, useful autoconf macros for detecting the OCaml, findlib, OCaml packages, and so on in your autoconf-generated ./configure scripts. To begin using these macros, you will need to copy the "ocaml.m4" file (usually located at "/usr/share/aclocal/ocaml.m4") to the autoconf macros directory in your project. Normally this is the "m4/" directory in your project, but the directory can be changed using the "AC_CONFIG_MACRO_DIR(DIR)" directive. If you have just created the "m4/" directory, then you may also need to do: aclocal -I m4 You can then add any of the macros described below to your "configure.ac" (or "configure.in"). Almost every OCaml project should use "AC_PROG_OCAML" first and probably "AC_PROG_FINDLIB" right after it. This manual page does not describe how to use autoconf. For that you should read the detailed autoconf info file ("info autoconf").
AC_PROG_OCAMLThis macro detects which tools of the usual OCaml toolchain are available. It defines and substitutes the following variables: OCAMLC set to the name of the bytecode compiler (eg. "ocamlc" or "ocamlc.opt"), or "no" if no OCaml installation was found OCAMLOPT the name of the native-code compiler, eg. "ocamlopt", "ocamlopt.opt" or "no" OCAMLBEST "byte" (if only the bytecode compiler is available) or "opt" (if both bytecode and native code compilers are available) OCAMLDEP the name of the dependency resolver, eg. "ocamldep" OCAMLMKTOP the name of ocamlmktop OCAMLMKLIB the name of ocamlmklib OCAMLDOC the name of ocamldoc OCAMLBUILD the name of ocamlbuild OCAMLLIB the OCaml library path (eg. C</usr/lib/ocaml/>) OCAMLVERSION the compiler version (eg. C<3.11.0>) Detecting if OCaml is installed Unlike old versions of these macros, "AC_PROG_OCAML" does not exit if no OCaml installation is detected. Therefore if you want to detect if OCaml is installed you have to do something like this: AC_PROG_OCAML if test "$OCAMLC" = "no"; then AC_MSG_ERROR([You must install the OCaml compiler]) fi This behaviour and usage pattern are consistent with other macros of the "AC_PROG_*") family. Cross-compiling If the configure script is invoked for cross-compiling then "AC_PROG_OCAML" will detect the cross-compiler versions of the OCaml compiler, eg. "OCAMLC=i686-pc-mingw32-ocamlc" etc. This happens automatically, and for most purposes you don't need to worry about it.
AC_PROG_FINDLIBThis macro checks for the presence of the ocamlfind program (part of findlib). It defines and substitutes "OCAMLFIND" to the name of the ocamlfind program, or "no" if not found. Note that this macro does not fail if ocamlfind is not found. If you want to force the user to install findlib, you should do: AC_PROG_FINDLIB if test "$OCAMLFIND" = "no"; then AC_MSG_ERROR([You must install OCaml findlib (the ocamlfind command)]) fi See also "AC_CHECK_OCAML_PKG".
AC_PROG_OCAMLLEXThis checks for the ocamllex program and sets "OCAMLLEX" to the name of the program (eg. "ocamllex" or "ocamllex.opt"), or "no" if not found.
AC_PROG_OCAMLYACCThis checks for the ocamlyacc program and sets "OCAMLYACC" to the name of the program, or "no" if not found.
AC_PROG_CAMLP4This checks for camlp4, and checks that the version matches the compiler version found previously. It sets "CAMLP4" to the name of the basic camlp4 program, or "no" if not found. The macro also checks for other tools of the camlp4 suite like camlp4o, camlp4orf, etc. For each of them, a fully capitalized variable is set to the tool name (or "no" if not found); all variable are substituted for when filling .in files. The full list of tools and respective variable names is as follows: camlp4 CAMLP4 camlp4boot CAMLP4BOOT camlp4o CAMLP4O camlp4of CAMLP4OF camlp4oof CAMLP4OOF camlp4orf CAMLP4ORF camlp4prof CAMLP4PROF camlp4r CAMLP4R camlp4rf CAMLP4RF
AC_CHECK_OCAML_PKGThis is the main macro that can be used to detect the presence of OCaml findlib packages. This macro uses ocamlfind to look up findlib packages (and thus requires that findlib itself has been installed, and that the package has been properly packaged with a META file etc.) If you want to find an OCaml findlib package which hasn't been installed with findlib then you should try using "AC_CHECK_OCAML_MODULE" instead. AC_CHECK_OCAML_PKG([name]) checks for an OCaml findlib package with the given name. If found, it defines and substitutes the variable "OCAML_PKG_name" where the "name" part is substituted for the package name by replacing all dashes with underscores. For example, AC_CHECK_OCAML_PKG([xml-light]) will set "OCAML_PKG_xml_light" to either "xml-light" or "no". To have the configure script fail if a package is not installed, do: AC_CHECK_OCAML_PKG([foo]) if test "$OCAML_PKG_foo" = "no"; then AC_MSG_ERROR([Please install OCaml findlib module 'foo'.]) fi In your Makefile.in, use the substitution variable in conjunction with ocamlfind, eg: .ml.cmo: $(OCAMLFIND) ocamlc -package @OCAML_PKG_foo@ -c $< -o $@ Note that also in the substitution variable dashes are replaced with underscores. Checking for alternative findlib package names In the (unlikely) case where the same library corresponds to different findlib package names on different systems, you can improve portability by checking for the alternative names passing a second argument to "AC_CHECK_OCAML_PKG": AC_CHECK_OCAML_PKG(PKGNAME,ALTERNATIVE-NAMES) The behaviour is the same as before if "PKGNAME" is found. Otherwise all names in "ALTERNATIVE-NAMES" are tested in turn as findlib package names. If one is found, it is set as the value set by the macro and substituted in .in files; otherwise "no" is set. Note that the variable name is determined by "PKGNAME", while the value depends on the actual alternative name found. For example, to detect the camlzip findlib package, either called "zip" or "camlzip", and to store the found value in the "OCAML_PKG_zip" variable you can do in your configure.ac: AC_CHECK_OCAML_PKG(zip,camlzip) and have a portable Makefile.in build line such as: .ml.cmo: $(OCAMLFIND) ocamlc -package @OCAML_PKG_zip@ -c $< -o $@
AC_CHECK_OCAML_MODULE(VARIABLE,NAME,MODULE,INCLUDE-PATHS)"AC_CHECK_OCAML_MODULE" is the hairier alternative to "AC_CHECK_OCAML_PKG". You should always use "AC_CHECK_OCAML_PKG" and ocamlfind/findlib if possible. The parameters are: VARIABLE This is the environment variable that is set. It will either be set to the include path, or to "no" if the module was not found. NAME This is the name of the module we are looking for. This parameter is just used for printing messages, and does not affect how the module is found. MODULE This should be an OCaml module name, representing the module name being looked up. You can put sub-modules here, eg. "CalendarLib.Date" INCLUDE-PATHS This is the default list of include directories to search, eg. "+calendar" For example, the following code will check for the OCaml Calendar module, and will distinguish between version 1 and version 2 of this module (which have incompatible APIs). AC_CHECK_OCAML_PKG(calendar) AC_CHECK_OCAML_MODULE(is_calendar2,calendar,[CalendarLib.Date],[+calendar]) After the above code has run, variables "OCAML_PKG_calendar" and "is_calendar2" will be set as follows: OCAML_PKG_calendar is_calendar2 Result yes +calendar Calendar v2 is installed yes no Calendar v1 is installed no no No Calendar module installed
AC_CHECK_OCAML_WORD_SIZEThis checks the word size of the OCaml compiler, and sets "OCAML_WORD_SIZE" to either 32 or 64.
SEE ALSOautoconf(1), <//ocaml-autoconf.forge.ocamlcore.org>, <//caml.inria.fr/>
AUTHORSVarious people have contributed to these macros over many years: o Olivier Andrieu o Jean-Christophe Filliatre o Richard W.M. Jones o Georges Mariano o Jim Meyering o Stefano Zacchiroli
LICENSECopyright X 2009 Richard W.M. Jones Copyright X 2009 Stefano Zacchiroli Copyright X 2000-2005 Olivier Andrieu Copyright X 2000-2005 Jean-Christophe Filliatre Copyright X 2000-2005 Georges Mariano All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The names of the contributors may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
REPORTING BUGSPlease report bugs to the authors at the project page: <//forge.ocamlcore.org/projects/ocaml-autoconf/>, using the forge bug tracker <//forge.ocamlcore.org/tracker/?group_id=69>. OCAML.M4(1)