go to
> obdgpslogger(1)
> obd2kml(1)
> obd2csv(1)
> obd2gpx(1)
> obdgui(1)
Homepage > Man Pages > Category > General Commands
Homepage > Man Pages > Name > O


man page of obdsim

obdsim: Simulate an ELM327 device


obdsim - Simulate an ELM327 device


obdsim [ options ]


obdsim simulates an ELM327 device connected to one or more ECUs
-g|--generator <generator-name> Choose a generator. A list of valid ones is output by --help. See section titled MULTIPLE ECUS below for more information. -s|--seed <seed> Generator-specific seed. See section titled PLUGIN SEEDS below for more information. The -s option must immediately follow the generator -d|--customdelay <delay-in-ms> Generator-specific delay. This is effectively a processing time for the ECU it is being added for. The -d option must immediately follow the generator -l|--list-generators Print a terse list of compiled in generators -L|--list-protocols Print a list of all protocols -p|--protocol <OBDII protocol> Launch as this protocol. Protocol is of form [A]{digit}, where optional "A" prefix means automatic and the digit is from --list-protocols -n|--benchmark <time> Change time to print samplerate to stdout. 'samples' are successful value returns, not AT commands or NO DATA/? responses. 'queries' are any and all client queries. Argument is in seconds, zero to disable. -q|--logfile <logfile> Write all serial comms to this logfile -o|--launch-logger Takes an [admittedly weak and hard-coded] attempt at launching obdgpslogger attached to the simulator in question. POSIX only. -c|--launch-screen Takes an [admittedly weak and hard-coded] attempt at launching screen attached to the simulator in question. To close that screen window, use ctrl-a, k. POSIX only. -t|--tty-device Instead of opening a pty, try to open this entry in /dev instead. POSIX only. -w|--com-port <comport> Specify virtual com port to be used on windows [eg "COM1"]. Windows only. -e|--genhelp <generator-name> Print out help for the specified generator, and exit. -V|--elm-version <version string> Pretend to be this when someone resets with ATZ or similar -D|--elm-device <device string> Pretend to be this when someone calls AT@1 -b|--bluetooth Listen on bluetooth. See section titled BLUETOOTH below -v|--version Print out version number and exit. -h|--help Print out help and exit.
Each plugin takes a seed. Here's what those seeds are: Random [Optional] It's a random seed Cycle [Optional] [cycle time in seconds[,number of gears]] Logger [Obligatory] Filename of an obdgpslogger logfile dlopen [Obligatory] Filename of a dynamically linked library [Optional] ",subseed" optional seed to pass to dlopen'd generator. Socket [Obligatory] ip-or-hostname:port DBus [Obligatory] Filename of a configuration file for the plugin gui_fltk [Irrelevant] Ignores the passed seed Error [Irrelevant] Ignores the passed seed


OBDSim supports multiple simulated engine control units (ECUs). For each generator you specify on the command-line, it creates an ECU. To seed each generator, the seed must immediately follow that generator on the command-line. For example, this creates a sim with three ecus. The first ecu is simulating the passed logfile, the second is generating random numbers with the seed 42, and the gui generator isn't using a seed. obdsim -g Logger -s ces2010.db -g Random -s 42 -g gui_fltk


OBDSim does not yet support the full set of ELM327 commands. The ELM327 datasheet covers all these in detail, but a short description of each AT command currently supported by obdsim is here: AT{0,1,2} Adaptive timing off/on/vigorous D{0,1} Display DLC [data bytes] on/off L{0,1} Linefeed on/off [always passes a CR] H{0,1} Headers on/off S{0,1} Space separators on/off E{0,1} Command echo on/off SP[A]{0-9,A-C} Set protocol. Optional 'A' prefix on number means "automatic" TP[A]{0-9,A-C} Try protocol. Same behaviour as SP[a]{0-9,A-C}. Always succeeds if protocol is known ST{n} Set timeout. Hex value is multiplied by 4, and measured in ms @1 Request the elm device description @2 Request the elm device identifier @3 Set the elm device identifier CVdddd Calibrate the current battery voltage to dd.dd RV Request the current battery voltage D Reset to defaults DP Describe protocol DPN Describe protocol by number I Request the device version id Z Reset the device WS Reset the device, warm start EXIT Not really an AT command; sending this tells obdsim to exit. Mostly useful in conjunction with --launch-screen


At time of writing, bluetooth is only supported on Linux. In order to make bluetooth work, you may need to set your bluetooth device to advertise that it's capable of the appropriate serial protocols. On my system here, I use the following two commands to set it temporarily [you'll want to substitute your own hardware address]: sudo rfcomm bind 0 00:02:72:14:41:C4 1 sudo sdptool add SP


The default sim ELM version and device both claim to be OBDGPSLogger. Some software may not like this. You may find examples of popular hardware to be useful: OBDPro obdsim -V ELM327\ v1.3\ compatible -D OBDPros\ LLC\ v3 OBDLink obdsim -V ELM327\ v1.3a -D SCANTOOL.NET\ LLC
obdgpslogger(1), obd2kml(1), obd2csv(1), obd2gpx(1), obdgui(1), obdlogrepair(1), obdsim-dbus(5)
Gary "Chunky Ks" Briggs <chunky@icculus.org> OBDSIM(1)

Copyright © 2011–2018 by topics-of-interest.com . All rights reserved. Hosted by all-inkl.
Contact · Imprint · Privacy

Page generated in 21.95ms.

brieftauben-versteigerung.com | dfptutorial.com | Ermitteln Sie Ihre IP-Adresse schnell und einfach