NAMEdcmdjpls - Decode JPEG-LS compressed DICOM file
SYNOPSISdcmdjpls [options] dcmfile-in dcmfile-out
DESCRIPTIONThe dcmdjpls utility reads a JPEG-ls compressed DICOM image (dcmfile- in), decompresses the JPEG-LS data (i. e. conversion to a native DICOM transfer syntax) and writes the converted image to an output file (dcmfile-out).
PARAMETERSdcmfile-in DICOM input filename to be converted dcmfile-out DICOM output filename
OPTIONSgeneral options -h --help print this help text and exit --version print version information and exit --arguments print expanded command line arguments -q --quiet quiet mode, print no warnings and errors -v --verbose verbose mode, print processing details -d --debug debug mode, print debug information -ll --log-level [l]evel: string constant (fatal, error, warn, info, debug, trace) use level l for the logger -lc --log-config [f]ilename: string use config file f for the logger input options input file format: +f --read-file read file format or data set (default) +fo --read-file-only read file format only -f --read-dataset read data set without file meta information # This option allows to decompress JPEG-LS compressed DICOM objects that have # been stored as dataset without meta-header. Such a thing should not exist # since the transfer syntax cannot be reliably determined without meta-header, # but unfortunately it does. processing options planar configuration: +pr --planar-restore restore original planar configuration (default) # If the compressed image is a color image, restore the planar # configuration as described in the Planar Configuration attribute. +pa --planar-auto automatically determine planar configuration from SOP class and color space # If the compressed image is a color image, store in color-by-plane # planar configuration if required by the SOP class and photometric # interpretation. Hardcopy Color images are always stored color-by- # plane, and the revised Ultrasound image objects are stored color-by- # plane if the color model is YBR_FULL. Everything else is stored # color-by-pixel. +px --color-by-pixel always store color-by-pixel # If the compressed image is a color image, store in color-by-pixel # planar configuration. +pl --color-by-plane always store color-by-plane # If the compressed image is a color image, store in color-by-plane # planar configuration. SOP Instance UID: +ud --uid-default keep same SOP Instance UID (default) # Never assigns a new SOP instance UID. +ua --uid-always always assign new UID # Always assigns a new SOP instance UID. other processing options: +io --ignore-offsettable ignore offset table when decompressing output options output file format: +F --write-file write file format (default) -F --write-dataset write data set without file meta information output transfer syntax: +te --write-xfer-little write with explicit VR little endian (default) +tb --write-xfer-big write with explicit VR big endian TS +ti --write-xfer-implicit write with implicit VR little endian TS post-1993 value representations: +u --enable-new-vr enable support for new VRs (UN/UT) (default) -u --disable-new-vr disable support for new VRs, convert to OB group length encoding: +g= --group-length-recalc recalculate group lengths if present (default) +g --group-length-create always write with group length elements -g --group-length-remove always write without group length elements length encoding in sequences and items: +e --length-explicit write with explicit lengths (default) -e --length-undefined write with undefined lengths data set trailing padding (not with --write-dataset): -p= --padding-retain do not change padding (default if not --write-dataset) -p --padding-off no padding (implicit if --write-dataset) +p --padding-create [f]ile-pad [i]tem-pad: integer align file on multiple of f bytes and items on multiple of i bytes
TRANSFER SYNTAXESdcmdjpls supports the following transfer syntaxes for input (dcmfile- in): LittleEndianImplicitTransferSyntax 1.2.840.10008.1.2 LittleEndianExplicitTransferSyntax 1.2.840.10008.1.2.1 DeflatedExplicitVRLittleEndianTransferSyntax 1.2.840.10008.1.2.1.99 (*) BigEndianExplicitTransferSyntax 1.2.840.10008.1.2.2 JPEGLSLosslessTransferSyntax 1.2.840.10008.1.2.4.80 JPEGLSLossyTransferSyntax 1.2.840.10008.1.2.4.81 (*) if compiled with zlib support enabled dcmdjpls supports the following transfer syntaxes for output (dcmfile- out): LittleEndianImplicitTransferSyntax 1.2.840.10008.1.2 LittleEndianExplicitTransferSyntax 1.2.840.10008.1.2.1 BigEndianExplicitTransferSyntax 1.2.840.10008.1.2.2
LOGGINGThe level of logging output of the various command line tools and underlying libraries can be specified by the user. By default, only errors and warnings are written to the standard error stream. Using option --verbose also informational messages like processing details are reported. Option --debug can be used to get more details on the internal activity, e.g. for debugging purposes. Other logging levels can be selected using option --log-level. In --quiet mode only fatal errors are reported. In such very severe error events, the application will usually terminate. For more details on the different logging levels, see documentation of module 'oflog'. In case the logging output should be written to file (optionally with logfile rotation), to syslog (Unix) or the event log (Windows) option --log-config can be used. This configuration file also allows for directing only certain messages to a particular output stream and for filtering certain messages based on the module or application where they are generated. An example configuration file is provided in <etcdir>/logger.cfg).
COMMAND LINEAll command line tools use the following notation for parameters: square brackets enclose optional values (0-1), three trailing dots indicate that multiple values are allowed (1-n), a combination of both means 0 to n values. Command line options are distinguished from parameters by a leading '+' or '-' sign, respectively. Usually, order and position of command line options are arbitrary (i.e. they can appear anywhere). However, if options are mutually exclusive the rightmost appearance is used. This behaviour conforms to the standard evaluation rules of common Unix shells. In addition, one or more command files can be specified using an '@' sign as a prefix to the filename (e.g. @command.txt). Such a command argument is replaced by the content of the corresponding text file (multiple whitespaces are treated as a single separator unless they appear between two quotation marks) prior to any further evaluation. Please note that a command file cannot contain another command file. This simple but effective approach allows to summarize common combinations of options/parameters and avoids longish and confusing command lines (an example is provided in file <datadir>/dumppat.txt).
ENVIRONMENTThe dcmdjpls utility will attempt to load DICOM data dictionaries specified in the DCMDICTPATH environment variable. By default, i.e. if the DCMDICTPATH environment variable is not set, the file <datadir>/dicom.dic will be loaded unless the dictionary is built into the application (default for Windows). The default behaviour should be preferred and the DCMDICTPATH environment variable only used when alternative data dictionaries are required. The DCMDICTPATH environment variable has the same format as the Unix shell PATH variable in that a colon (':') separates entries. On Windows systems, a semicolon (';') is used as a separator. The data dictionary code will attempt to load each file specified in the DCMDICTPATH environment variable. It is an error if no data dictionary can be loaded.
COPYRIGHTCopyright (C) 2009-2010 by OFFIS e.V., Escherweg 2, 26121 Oldenburg, Germany. DCMDJPLS(1)