go to
> aeib(1)
> aeipass(1)
> aeuconf(5)
Homepage > Man Pages > Category > General Commands
Homepage > Man Pages > Name > A

aegis integrate fail

man page of aegis integrate fail

aegis integrate fail: fail a change integration

NAME

aegis integrate fail - fail a change integration
SYNOPSIS
aegis -Integrate_Fail -File reason-file [ option... ] aegis -Integrate_Fail -REASon 'reason-text' [ option... ] aegis -Integrate_Fail -Edit [ option... ] aegis -Integrate_Fail -List [ option... ] aegis -Integrate_Fail -Help
DESCRIPTION
The aegis -Integrate_Fail command is used to inform aegis that a change has failed integration. The change will be returned from the being integrated state to the being developed state. The change will cease to be assigned to the current user, and will be reassigned to the originating developer. The integration directory will be deleted. boxwid = 1 down S2: box "being" "developed" arrow " develop" ljust " end" ljust box "awaiting" "review" arrow " review" ljust " begin" ljust box "being" "reviewed" arrow " review" ljust " pass" ljust box "awaiting" "integration" arrow " integrate" ljust " begin" ljust S5: box "being" "integrated" T7: spline -> from S5.e then right 0.5 then up 4 then to S2.e "integrate " rjust "fail " rjust at T7.c + (0.5,0) The reviewer and the developer will be notified by mail. See the integrate_fail_notify_command in aepconf(5) for more information. The reason-file will contain a description of why the change was failed. The file is in plain text. It is recommended that you only use newline to terminate paragraphs, (rather than to terminate lines) as with will result in better formatting in the various listings. Notification On successful completion of this command, the integrate_fail_notify_- command field of the project attributes is run, if set. See aepattr(5) and aepa(1) for more information.

OPTIONS

The following options are understood: -Change number This option may be used to specify a particular change within a project. See aegis(1) for a complete description of this option. -Edit Edit the attributes with a text editor, this is usually more convenient than supplying a text file. The VISUAL and then EDITOR environment variables are consulted for the name of the editor to use; defaults to vi(1) if neither is set. See the visual_command and editor_command fields in aeuconf(1) for how to override this specifically for Aegis. Warning: Aegis tries to be well behaved when faced with errors, so the temporary file is left in your home directory where you can edit it further and re-use it with a -file option. The -edit option may not be used in the background, or when the standard input is not a terminal. -Edit_BackGround Edit the attributes with a dumb text editor, this is most often desired when edit commands are being piped into the editor via the standard input. Only the EDITOR environment variable is consulted for the name of the editor to use; it is a fatal error if it is not set. See the editor_command field in aeuconf(1) for how to override this specifically for Aegis. -File filename Take the attributes from the specified file. The filename '-' is understood to mean the standard input. -Help This option may be used to obtain more information about how to use the aegis program. -Keep This option may be used to retain files and/or directories usually deleted or replaced by the command. Defaults to the user's delete_file_preference if not specified, see aeuconf(5) for more information. -No_Keep This option may be used to ensure that the files and/or directories are deleted or replaced by the command. Defaults to the user's delete_file_preference if not specified, see aeuconf(5) for more information. -List This option may be used to obtain a list of suitable subjects for this command. The list may be more general than expected. -Project name This option may be used to select the project of interest. When no -Project option is specified, the AEGIS_PROJECT environment variable is consulted. If that does not exist, the user's $HOME/.aegisrc file is examined for a default project field (see aeuconf(5) for more information). If that does not exist, when the user is only working on changes within a single project, the project name defaults to that project. Otherwise, it is an error. -REAson text This option may be used to provide the failure reason on the command line, rather than in a file. You will need to use quotes to insulate the spaces from the shell. -TERse This option may be used to cause listings to produce the bare minimum of information. It is usually useful for shell scripts. -Verbose This option may be used to cause aegis to produce more output. By default aegis only produces output on errors. When used with the -List option this option causes column headings to be added. -Wait This option may be used to require Aegis commands to wait for access locks, if they cannot be obtained immediately. Defaults to the user's lock_wait_preference if not specified, see aeuconf(5) for more information. -No_Wait This option may be used to require Aegis commands to emit a fatal error if access locks cannot be obtained immediately. Defaults to the user's lock_wait_preference if not specified, see aeuconf(5) for more information. See also aegis(1) for options common to all aegis commands. All options may be abbreviated; the abbreviation is documented as the upper case letters, all lower case letters and underscores (_) are optional. You must use consecutive sequences of optional letters. All options are case insensitive, you may type them in upper case or lower case or a combination of both, case is not important. For example: the arguments "-project, "-PROJ" and "-p" are all interpreted to mean the -Project option. The argument "-prj" will not be understood, because consecutive optional characters were not supplied. Options and other command line arguments may be mixed arbitrarily on the command line, after the function selectors. The GNU long option names are understood. Since all option names for aegis are long, this means ignoring the extra leading '-'. The "--option=value" convention is also understood.

RECOMMENDED ALIAS

The recommended alias for this command is csh% alias aeifail 'aegis -ifail \!* -v' sh$ aeifail(){aegis -ifail "$@" -v}

ERRORS

It is an error if the change is not in the being integrated state. It is an error if the change is not assigned to the current user.

EXIT STATUS

The aegis command will exit with a status of 1 on any error. The aegis command will only exit with a status of 0 if there are no errors.
ENVIRONMENT VARIABLES
See aegis(1) for a list of environment variables which may affect this command. See aepconf(5) for the project configuration file's project_specific field for how to set environment variables for all commands executed by Aegis.
SEE ALSO
aeib(1) begin integration of a change aeipass(1) pass integration of a change aeuconf(5) user configuration file format

COPYRIGHT

aegis version 4.24.3.D001 Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Peter Miller The aegis program comes with ABSOLUTELY NO WARRANTY; for details use the 'aegis -VERSion License' command. This is free software and you are welcome to redistribute it under certain conditions; for details use the 'aegis -VERSion License' command.

AUTHOR

Peter Miller E-Mail: millerp@canb.auug.org.au /\/\* WWW: //www.canb.auug.org.au/~millerp/ AEGIS INTEGRATE FAIL(1)
 
 
 

Copyright © 2011–2018 by topics-of-interest.com . All rights reserved. Hosted by all-inkl.
Contact · Imprint · Privacy

Page generated in 20.83ms.

Welcher Autoresponder ist der Richtige? | fliegender-drache.de | salvador at tradebit